دسته ها

منوی سایت

دستگاه تست جهانی برد مصنوعی نمایشگر دیجیتال سری MDW-MS20

Mitech MDW-MS20 Series Digital Display Artificial Board Universal Testing Machine

0 دیدگاه
نام تجاری: Mitech مدل: MDW-MS20 محدوده اندازه گیری: 2٪ - 100٪ از حداکثر نیروی آزمایش دقت رزولوشن: وضوح 0.01 میلی متر وزن واحد اصلی: حدود 450 کیلوگرم ابعاد: 700*580*1720 میلی متر


مشتری گرامی : قبل از خرید این محصول از موجود بودن آن اطمینان پیداکنید ، جهت هماهنگی با شمـاره : 3 - 71 90 33 88 - 021 تماس حاصل فرمائید

نقد و بررسی

دستگاه تست جهانی برد مصنوعی نمایشگر دیجیتال سری Mitech MDW-MS، از طریق حرکت پیچ محرک موتور کنترل اتوماتیک تک تراشه، می تواند انواع مختلفی از خواص فیزیکی و شیمیایی آزمایش را برای پنل های چوبی و پنل های تزئینی انجام دهد. با کنترل داخلی، موتور سروو AC، کنترل خودکار و سیستم جمع آوری داده، عملکرد پایدار، ساختار قوی، قابلیت اطمینان بالا، عملیات ساده، درجه بالایی از اتوماسیون، به طور گسترده در پنل های چوبی و پنل های تزئینی پیوند داخلی استحکام، استحکام پیوند سطحی، آزمون استحکام کششی، آزمایش خمشی، آزمایش مدول الاستیک، آزمایش نیروی چنگال و آزمایش برش برش تخته سه لا استفاده می شود.  یک تجهیزات تست دقیق حرفه ای ضروری برای بهبود راندمان تولید و صرفه جویی در هزینه های تولید است.

Working Principle
The testing machine is a combination of testing machine technology and mechanical transmission technology, sensor technology, automatic control technology. It consists of drive system, control system, measurement system. The drive system is mainly used for the movement of the beam of the testing machine, and the speed of the beam can be controlled by changing the motor speed. The control system is operated by the console control testing machine, and the state of the testing machine and the test parameters can be obtained through the display screen.The measurement system utilizes sensors, signal amplifiers, photoelectric encoders, and data processing systems to perform force measurement, deformation measurement, beam displacement measurement. Drive system, control system, measurement system and other subsystems to coordinate with each other to complete the material pull, pressure, bending and other mechanical performance testing.

Working Conditions
l Operation Temperature:Ambient temperature ~ 45 ℃;

l Relative humidity:20%~80%;

l In an environment free from vibration, corrosive medium and strong magnetic field;

l Installed on a flat basis

l Power supply voltage fluctuation does not exceed 10% of rated voltage.

Instrument Features
l Widely used in the wood-based panels and decorative panels of the internal bond strength, surface bonding strength, tensile strength test, bending test, elastic modulus test, grip force test and plywood shear cut test;

l The speed of the beam during the test can be pre-set by the program, user-friendly;

l Beam and bottom panel through the two ball screw frame structure to ensure that the frame structure rigid;

l All-digital AC servo motor through the no noise synchronous toothed belt, high precision seamless ball screw drive to ensure its smooth load, no gap, high transmission efficiency;

l 5000-line optoelectronic encoder, the relative high accuracy of displacement;

l High precision and high stability of the tire tension and compression strain sensor, coupled with high-precision measurement and amplification system to ensure that the test force of high precision;

l Built-in controller to ensure that the test machine can be specimen deformation, test force and displacement of the closed-loop control;

l With a limit protection function, arrived at the limit after the automatic shutdown, to prevent the collision in the middle of the beam caused by overload or even damage to the sensor;

l Automatically according to the size of the load can be switched to the appropriate range to ensure the accuracy of measurement data;

l Zero adjustment, calibration, storage, etc. without any analog adjustment link, the control circuit is highly integrated;

l Sample process a high degree of automation, the system can achieve the accuracy of the automatic calibration;

l Test end, test data and test curve automatically saved for later retrieval analysis;

l can be batch test, the same parameters of the sample only a test set;

l Use of LCD display, menu-type user interface, simple and intuitive, convenient and quick;

l Consistent with GB, ISO, ASTM, DIN and other relevant domestic and foreign standards.

Instrument Maintenance
l Before using this instrument, please read the instruction manual carefully, understand the operation steps and precautions, avoid the damage caused by improper operation or personal safety accident;

l Test machine is a large precision instruments, should pay attention to water, moisture. Exposed workstations, upper and lower beam parts and attached parts should be coated with anti-rust oil to prevent rust;

l If idle for a long time, at least once a week and move the upper and lower beams, so that beam position, silk mother often activities to prevent rust;

l After the experiment should be promptly cleaned up debris and other dirt, to prevent accidental damage to the instrument, to avoid shortening the life of the test machine;

l After the completion of the test, will be attached to a good, to prevent the loss of equipment for the next use;

l Electrical connection cable and equipment should be careful when connected, moderate efforts, remember not to swipe, hard pull.

مشخصات

نظرات کاربران

دیدگاه خود را در مورد این کالا وارد نمایید.


ویدیو معرفی

محصولات مشابه